VINITECH - SIFEL

BIO-MATIC RANGE : FLEURIMATIC

Description

FLEURIMATIC makes it possible to carry out a flat Ridge removal, while limiting the volume of earth moved. By combining an inter-vine behind the plow-back with the FLEURIMATIC tool, the vines can be kept free of weeds.

Presented by

Other products from The exhibitor

KIT SEMI-DIRECT

KIT SEMI-DIRECT – AGROMY PACK – ROLOFACA PREFACE Advantages – Semi direct : • Higher operating speed • Adaptable to the sleeve attachment of an EVOLUKIT® • No soil...

ROLOFACA & PULVERIZERS

Rollers can be weighted at a rate of 7 kg every 10 cm. Example : a 150 cm Faca can be weighted with 7 kg x (150 cm / 10) = 105 kg. In order to avoid the problem of...

AGROMY PACK

Available for mounting on the EVOLUKIT® perch or supplied on request with the perch. The AGROMY PACK allows mechanical weeding of the inter-row with the special feature...

INTER-VINE MOWERS MINI MOWER TONDO

Inter-vine mowing heads can be mounted on frames or as a complement to existing inter-vine shredders. They allow easy maintenance of the plantation strip in...

LONG FRAME

The LONG FRAME is a tool carrier with manual or hydraulic spacing. With an effective boom length of more than 1.25 meters, the LONG FRAME makes it possible to work the...

HYDRAULIC POWER UNIT

BOISSELET offers a wide range of hydraulic power units. These units allow the use of all the hydraulic tools adapted to older generation tractors, or to inter-row...

BIO-MATIC RANGE : FACAMATIC

FACAMATIC is a system designed on the principle of an inter-vine ROLOFACA. In a “no-tillage” or “no-mow” approach, it allows the grass to be rolled along the planted...

MEDIUM FRAME

The MEDIUM FRAME has been designed to combine tillage and/or hoeing equipment between rows with the use of inter-vine tools. It is possible to use this frame in either...

ELECTRICAL INTERCEP EVOLT®

EVOLT® is designed for the use of different adaptable and modular plowing concepts for decavating, hoeing, decompaction with a share or a serrated disc of the planting...

SUCK REMOVER

The sucker remover is intended for the mechanical cleaning of vineyards. It enables: • the detachment of young, non-fruit-bearing shoots (suckers) from the trunk of the...

TOOL HOLDER ARBO DOUBLE

The ARBO DOUBLE TOOL HOLDER is designed for all types of work in large plantations : interplant mowing, interplant or fixed soil maintenance tools, pruning sweepers,...

BIO-MATIC RANGE : JURAMATIC

JURAMATIC allows the soil to be broken up as close as possible to the plants. This lifts and aerates the soil from the inter-vine row. In combination with the...

PARALLELOGRAM AUGERS TAP 400 – G12

The TAP 400 – G12 auger is initially designed to be fitted to the side tool carriers of single-row tractors. It can also be fitted to the front of single-row and 3-row...

RIPPER

BOISSELET offers a full range of tools intended for specific operations such as tilling, subsoiling, and trace removal.

COLUMN TOOL HOLDER (P.O.C II)

The Column Tool Carrier (P.O.C II) is a very practical system which allows to position a whole range of tools between the wheels of an inter-row tractor. Preferably...

EVOLUKIT® PERCHES

Thanks to our location in Burgundy, in the heart of high-density vineyards, we have since the mechanization of these vineyards in the 1950s developed specific tools...

ACOLYTE III

The ACOLYTE III is designed for vines planted with more than 1.50 m between rows. On the ACOLYTE III, it is possible to mount various tools to work the entire vine row....

ARBORICULTURE : TOOL HOLDER ARBO REINFORCED

The ARBO REINFORCED TOOL HOLDER can be mounted on the front or rear hitch of a tractor, as well as in a fixed frontal position. Thanks to different attachments, it can...

BIO-MATIC RANGE : PÉTALMATIC+

PÉTALMATIC+ is a rotary ridge removal tool. It was initially designed for light ridge removal of vines that have been affected by erosion over many years. It can be...

BIO-MATIC RANGE : CUTMATIC

CUTMATIC is equipped with a vertical upright and a 350 mm or 400 mm long horizontal blade (500 mm in the flat blade version) for flat hoeing. CUTMATIC system enables...

RIDGE REMOVAL PLOWSHARES – PLOW-BACK ATTACHMENTS

When the crops have been mechanically ridged (with a moldboard tool) or naturally ridged (repeated passages of machinery), it is necessary to undertake a delicate...

VINTAGE KIT (LEFT-SIDE & RIGHT-SIDE EQUIPMENT)

The VINTAGE KIT is based on the plow-back devices invented and manufactured by BOISSELET since 1969. Now modernized and equipped with several tools: ridge removal,...

BIO-MATIC RANGE : VALMATIC I & II

VALMATIC is a system of concave discs Ø 350 mm that can be oriented and tilted, fitted on the ADAPTATION DK to decompact and loosen the inter-vine row. Thanks to the...

ROTARY HARROW

The hydraulic spade is the ideal tool to decompact the soil without turning it over. It also allows you to bury plant debris and level the terrain. The result is cloddy...

CANADIENS

BOISSELET offers a full range of tools intended for specific operations such as tilling, subsoiling, and trace removal.

RIDGING – RIDGERS – HALF-RIDGERS

For ridging, the objective might be different: – Avoid frost at the base of the vine, by creating a mound that covers the trunk of the vine. – Drain away excess water...

SLIDING AUGERS TAC 400 – TAC PRO 450

The auger column is mounted on a sliding structure, guaranteeing total flexibility and safety of use. A hydraulic motor in the TAC version or a hydraulic motor...

INTER-ROW MOWERS GIRO COMBI – PM – GM & MM

BOISSELET mowers are robustly designed and can be used in rows with varying degrees of grass cover. Our range of mowers is made up of fixed or adjustable inter-row...

MINI-ROTOFIL

With its horizontal rotation axis, the MINI-ROTOFILS range enables to mechanical cleaning of the vines. They make it possible to destroy the hard-to-reach weeds around...

REINFORCED FRAME

The REINFORCED FRAME equipment is designed with a hitch allowing the adjustment of the hydraulic spacing of the inter-vine tools and a lifting cylinder to either...

FRONT GANTRY FRONTO®

FRONT GANTRY FRONTO® The frontal pendulum gantry FRONTO® is intended for light work and vines planted from 1.50 m between rows. On FRONTO® it is possible to mount...

EVO4+ SERVOMOTOR

Designed on the basis of a hydraulic torque amplifier (steering orbitrol), the Servomotor is a support that allows the adaptation of farming, mowing or inter-vine soil...

INTER-VINE MOWERS FILMATIC

The FILMATIC mowing head can be mounted on frames or as a complement to existing inter-vine shredders. It allows for easy maintenance of the plantation strip in...

COMPACT FRAME

COMPACT FRAME are manual or hydraulically operated tool holders that can be mounted in pull or push mode. With its small footprint, the COMPACT FRAME is ideal for...

BIO-MATIC RANGE : STARMATIC

STARMATIC est un outil de binage rotatif équipé de 3 lames en « L » favorisant un mouvement de sol en créant un sol motteux. La forme des dents facilite le travail dans...

BIO-MATIC RANGE : BROSMATIC

BROSMATIC is a tool made up of a brush with metal strands. Used on previously worked soil, it allows a superficial mechanical weeding, without moving the soil. The...

BIO-MATIC RANGE : ADAPTATION DK

The ADAPTATION DK is a system that transforms the rotary movement of the Servomotor into a movement parallel to the planting row. Associated with this adaptation, a...

S-H GROUND SHREDDER

The BOISSELET range of vine shoot shredders consists of both ground and off-ground models. Shoot shredders can be mechanically driven (using a chain angle gearbox and...

DISCS HARROWS – DE-CLODDING HARROW – WEEDING HARROW

Disc harrows are simple and fast tools for working between rows. They can be used for ridging, plow-back and / or for weeding. They are mainly used to level rows marked...

CONTINUOUS TRACK RANGE

The BOISSELET design and engineering team has been working with winegrowers since the early days of mechanization, and over the years has developed a range of tools...

MECHANICAL INTER-VINE IMPLEMENTS

Inter-vine blades are complementary tools to mechanical hoes for working between plants. They are fitted on a welded attachment to an offset leg, equipped with a plant...

INTERCEPS & INTER-ROW MOWER INTEGRA®

The INTEGRA® mower allows inter-row work as well as inter-vine mowing for plantations from 0.90 to 1.20 m. It is equipped with 2 holders blades (equipped with 2 knives...

DIRIGIBLE PLOWSHARE

Adaptable on a stanchion or sleeve attachment – Secured by a 50 x 30 mm sleeve attachment – Inter-vine triangle share on offset leg (Simply mount a left leg and a...

ARBORICULTURE : TOOL HOLDER ARBO LIGHT

The ARBO LIGHT TOOL HOLDER can be mounted on the front or rear hitch of a tractor, as well as in a fixed frontal position. Thanks to different attachments, it can be...

BIO-MATC RANGE : DÉCAVATIC

DÉCAVATIC enables traditional ridge removal work, combining respect for the plant with high quality work. Associated with the ADAPTATION DK mounted on the Servomotor,...

VINE SHOOT SHREDDER : ROTABO

The BOISSELET range of vine shoot shredders consists of both ground and off-ground models. Shoot shredders can be mechanically driven (using a chain angle gearbox and...

,,